Durable SS304 Laboratory Fume Hood Benchtop Fume Hood

Supply capacity

Supply Ability: 5000 sets of laboratory fume hoods per month

 

Packing and shipping

Packing details

Special export cartons and wooden boxes, or customized packaging according to customers.

 

Port

Tianjin, China/Customer designation

 

1800 * 900 * 2350
1500 * 900 * 2350
1200 * 900 * 2350

Shell description:

The shell adopts 1.0mm stainless steel panel (304) in CNC machining center for cutting, positioning and drilling,
After bending and welding, the surface is flat and there is no solder joints.

Note for inner shell:

Use 1.0mm stainless steel panel. Provides a movable maintenance hole to facilitate the maintenance of the circuit,
Waterway and gas circuit.

Fluorescent lamp description:

The fluorescent lamp is hidden on the panel, not in contact with the airflow in the fume hood, and
Easy to replace. Use a 30W fluorescent lamp and provide 5mm tempered glass.

Handle description:

Use corrosion-resistant pvc handles or all stainless steel handles.

Deflector description:

Use 1.0mm stainless steel panel.

Power description:

Use laboratory special power sockets and six-hole 10-inch universal sockets.

Window description:

Aluminum profile, with plastic profile frame, adjustable window is 5mm safety (tempered) glass, no segments
Balance lifting, can hover in any position.

Adjustable footnote:

The height of the cabinet with steel adjustable feet can be adjusted according to the indoor
The floor is adjusted appropriately, and the maximum adjustment range is 0-30mm.

Progress analysis:

After all the steel plates are welded and polished, they are flat in appearance and have no solder joints. All water,
Both electricity and gas circuits must be safe, applicable and concealed. A maintenance hole is provided on the rear panel of the cabinet.

 

Three baffles allow harmful gases in different height spaces to be discharged from different areas. Fume hood Exhaust the air in the fume hood at a speed of 0.5 m/s at the wind speed of the work surface to ensure that there is no residual gas. The ventilation efficiency is high, the exhaust volume is about 1600 m3/h, and the noise is low.

 

Lower cabinet (ordinary bottom cabinet), door panel: 1.0mm stainless steel plate (double layer),
It can be disassembled through the anti-vibration pad without welding. In the CNC machining center, cutting, positioning and punching, bending and welding are performed.
Description: The shell adopts 1.0mm stainless steel panel (304) in the CNC machining center, cutting, positioning and punching,
After bending and welding, the surface is flat without welding