Beijing leimingte laboratory equipment Co., Ltd
| Place of Origin: | Beijing China |
|---|---|
| Brand Name: | Lei Mingte |
| Certification: | ISO9001:2008 ISO14001：2015 ISO18001：2007 |
| Minimum Order Quantity: | 1 |
| Packaging Details: | Wooden box |
| Delivery Time: | 15 days |
| Payment Terms: | L/C, D/A, T/T, D/P, Western Union, MoneyGram |
| Supply Ability: | 1000 meters |
| Material: | Wood | General Use: | Laboratory Furniture |
|---|---|---|---|
| Type: | Laboratory Furniture,School Furniture | Color: | Optional,Any Color |
| Size: | Customized Size,L*750/1500*850/900mm | Function: | Work Station,work Station For All Labs,Chemistry Lab Room Furniture,laboratory Work Bench,Lab Experimental Operation |
| High Light: | 750mm School Laboratory Furniture,900mm School Laboratory Furniture,900mm Lab Test Bench |
||
School Test Bench
1. New type of magnesium aluminum plastic structure, zero formaldehyde, overall 1200 * 600 * 780mm. The student position is hollow, ergonomically designed, simple and beautiful, and rounded corners are used in all areas that are easy to collide.
2. Schoolbag bucket: overall size 400 * 260 * 100mm, using environmentally friendly ABS plastic engineering one-time injection molding, bottom and face add warp and weft reinforcement ribs to prevent deformation and bending. A screw hole is injected at the center of the front end of the schoolbag bucket, and the schoolbag bucket is fixedly connected to the middle beam by screws, which can be disassembled and easily assembled. There is a recessed round groove hanging stool card slot in the middle, which can be placed and placed on the experimental stool. The schoolbag pocket has been inspected by the national authoritative testing agency, and the plastic parts have a hardness of Shore HD73. The schoolbag pocket has been tested to contain no phthalates, heavy metals such as lead, cadmium, chromium, mercury, polycyclic aromatic hydrocarbons and other undesirable substances. It complies with GB/T 32487- 2016 "General Technical Requirements for Plastic Furniture" and GB 28481-2012 "Limits of Hazardous Substances in Plastic Furniture" standards, the test report issued by a national furniture inspection agency shall be provided when bidding, and the test report shall be marked with the words dedicated to the bidding of this project. And stamp the manufacturer's fresh seal.
3. The side adopts a three-section high-strength aluminum alloy structure, the overall specification: 562*770mm, of which the upper bracket size is 562*143*50mm, and the lower bracket size is 562*133*50mm. The column adopts an inclined design, embedded in the upper and lower cast aluminum brackets 20mm, and the rear end is equipped with a reinforced support beam. The upper and lower brackets on the side are formed by 4mm thick aluminum die-casting at one time. Each part is connected with special positioning parts, and the upper and lower brackets are connected and fixed with high-strength hexagonal socket screws 8*25. The upper bracket is designed with a power plug hole, and a special metal fixing slot is die-casted in the center of the upper bracket at one time. It is specially used with the national standard five-hole socket. The four card slots of the socket core plastic shell can be directly snapped into the upper bracket for fixing. No additional screws or glue are allowed. The upper and lower brackets each have two wiring holes with a diameter of 16mm. The power core can be used for connecting wires in the column to connect to electricity. The wiring and routing are convenient to avoid exposed wires. There is also a plastic protective cover to cover and protect the power core to ensure the safety of electricity. The socket core has a national compulsory product certification test report.
4. The column is designed with a rhombus octagonal structure, the specification is 105*50mm, and the thickness is 1.5mm. The vertical plane and the inclined plane each have four sides, the angle between the front vertical plane and the inclined plane is 19 degrees, and the angle between the side vertical plane and the inclined plane is 71 degrees. A groove is arranged in the middle of the outer facade of the column, which is more convenient and beautiful when connected with the middle beam. Increase the groove edge band to block the screw holes, and there is no visible screw hole on the side of the table, and protect users from the aluminum edge. The edge bands are sprayed in different colors to enrich the overall color matching of the table.
5. The front beam, the middle beam, the rear beam and the middle and lower beams are all made of high-strength extruded aluminum alloy mold profiles, and the surface of the aluminum material is treated by epoxy resin outdoor powder electrostatic spraying. The size of the middle beam is 37*28mm, and the aluminum material is designed with a unique aluminum tear line. After the middle beam is installed, an empty slot can be torn out from the aluminum material, and the power cord is placed in the slot to maximize the protection of students The electricity is safe and the power wiring is convenient. The size of the front and rear beams is 50*41mm, and the front semi-circular arc ergonomic design is adopted, the arc angle is R30, the thickness of the mounting screw is 1.7mm, and the other thickness is 1.2mm. The rear beam is equipped with a water-retaining strip assembly chute to facilitate the installation of the water-retaining strip. The size of the water-retaining strip is 14*52mm. The size of the middle and lower beam is 100*19mm, and the upper and lower waist design is adopted to strengthen the strength of the beam.
6. The back water retaining strip is integrally extruded by the mold, and the bayonet water retaining strips of different heights are fitted according to the table tops of different thicknesses. In addition, it is equipped with aluminum alloy water retaining block of corresponding size for fixing aluminum alloy table corners and water retaining strips on both sides. The aluminum alloy water block is formed by die-casting of aluminum alloy, and the surface is electrostatically sprayed with epoxy resin outdoor powder.
7. Lower bracket feet: Both ends of the lower bracket feet are provided with a circular hole with a diameter of 10mm, which can be fixed to the ground by a blast screw or used with an adjusting foot with a diameter of 50mm. The adjusting foot is integrally injection molded with a 12×50 national standard screw and high-quality plastic, which has strong bearing capacity. The side corners of the table are equipped with ABS foot covers with different decorative colors.
8. The entire table has been tested by a national authoritative third-party testing agency. The metal surface coating is smooth and uniform, the color is consistent, and there are no defects such as sagging, bumps, wrinkles, and flying paint. The contact with the human body is smooth and free of burrs; the mechanical properties of the table have been tested. , In line with the standard requirements of GB 24820-2009 "General technical conditions for laboratory furniture"; the aluminum alloy profile used in the table has been tested, and the size deviation, mechanical properties and chemical composition are all in line with the standard of GB/T 5237.4-2017 "Aluminum alloy building profile" Requirements: The Vickers hardness of aluminum material reaches 77, the hydrochloric acid resistance test is qualified, and the solvent resistance test reaches level 4. It is promised to provide a copy of the above-mentioned test report and the manufacturer’s authorization letter when bidding. The test report and authorization letter must be marked with the words dedicated to bidding for this project and stamped with the manufacturer’s fresh seal.
