1) Solid core physical and chemical board
2) Epoxy resin board
3) Imported Trespa
4) Ceramic plate
Second, the main body
(Including side plate, front steel plate, back plate, top plate, deflector, lining plate and lower cabinet) are made of 304 stainless steel plate with 1.0mm thick surface drawing treatment, imported automatic CNC laser cutting machine cuts and folds The automatic CNC bending machine bends into shape at one time, and the welding adopts argon arc welding. The deflector is a three-stage design, which can quickly and effectively discharge the internal gas and reduce the damage to the human body and the environment. The movable window is 5mm high-quality tempered glass, the door opening height is 800mm, and it can rise and fall freely. The up and down sliding device of the sliding door adopts synchronous belt and synchronous wheel drive. (The door tempered glass is inlaid in the aluminum alloy door frame slot, and the sliding door can be slid without more than 2kg of gravity. It can be stopped at any operating position; the sliding door handle is made of aluminum alloy, the surface is epoxy resin powder electrostatic spraying, high temperature curing, corrosion resistance Good performance). All the internal connection devices of the connection part need to be hidden and arranged and anti-corrosion, without exposed screws. The external connection devices are made of chemically resistant stainless steel. The exhaust outlet is circular with a diameter of 250mm and is connected by a sleeve to reduce gas turbulence. The operating table is made by cutting and bending a 304 stainless steel plate with a thickness of 20mm and a surface drawing treatment with a thickness of 1.0mm.
The circuit control panel adopts a liquid crystal display (the speed can be adjusted freely, which can be adapted to most similar products on the market, and supports the electric damper to open at 0-90 degrees in 6 seconds). Illuminated LED lights, quick start, installed on the top of the fume hood. The lamp shell is a transparent protective cover to effectively prevent smoke and steam from entering. Sockets Four 10A 220V five-hole multi-function splash-proof sockets have transparent covers on the front, and the wires use national standard 2.5 square copper core wires. The main switch 25A circuit breaker is installed on the front with a transparent shell. The water faucet nozzle is made of brass, and the surface is electrostatically sprayed with epoxy resin. And installed on the operating table inside the fume hood. The imported sink is made of PP material, which is resistant to acid, alkali and corrosion. The lower cabinet door handle is 304 stainless steel U-shaped handle, and the hole center wheelbase is 128mm. Hinge DTC brand large bending damping hinge. A maintenance window and functional reserved holes are reserved in the front to facilitate the installation of various types of water and gas circuits.