|Place of Origin:||CHINA|
|Minimum Order Quantity:||1 set or 1 unit|
|Price:||negotiable ($150 - 300 per meter)|
|Packaging Details:||safety package for transporation|
|Delivery Time:||within 7 - 20 workdays after recevided the deposit|
|Payment Terms:||T/T, Western Union, L/C|
|Supply Ability:||50000 set per month|
|Material:||Painted Steel / Wooden / SUS / Aluminum Alloy / MFC / PP||Height:||850-900 Or Higher (height Adjustable 0-30mm)|
|Warranty:||Three Years' Warranty||Frame:||Front Frame Or C, H Type Frame|
|Lab Furniture:||Lab Table, Lab Bench, High Cabinet, Fume Hood Etc||Other Furniture:||Office Furniture (Space Series)|
|Payment:||T/T (40% T/T As Deposit), Balance Before Delivery||Other Equipment:||Laminar Flow Cabinets, Biosafety Cabinet|
|Accessories:||Socket, Faucet, Gas Fitting, Eyewash, Pegboard, Shelves Etc||Structure:||Floor Mounted Or Suspended|
|Packing:||Bubble Film+Hard Cotton+(Wooden Package)||Lab Stool:||For Science, School, Pharmaceutical Industry Etc|
|Fume Hood:||Ducted And Recirculating (ductless)|
304 SUS Phenolic Resin Epoxy Resin WorkTops Fume Hood Laboratory Work Benches
304 Stainless Steel
Work surfaces are designed for extra heavy chemical and physical use. Outstanding heat and chemical resistance is its main characteristic.
Thick decorative and durable laminates are available in an array of colors, shapes and sizes to support your laboratory needs when the resistant qualities of resin or steel surfaces are not needed.
Because of the natural resistance to corrosion, the industry has found it superior to any other top material for laboratory work. It is resistant to most organic and inorganic chemicals and is non-toxic. In addition, it is resistant to mechanical and thermal shock.
Surfaces made of cost effective High Pressure Phenolic Resin composite are resistant to chemical stain and corrosion. Non-porous and non-conductive, it’s strong durable qualities enable it to withstand high impact and shock. It is easily cleaned with soap and warm water.
Worktop widths are from 600mm to 900mm for wall benches and from 700mm to 1800mm for peninsula and island benches, however any widths required can be catered for. Worktops are standard 850mm high in laboratories, and 720/750mm high for write up benches, however other heights are also available.
All the below can be mixed to suit the needs of each individual laboratory.
The worktop is supported by cantilever steel frame system. Cupboard and drawer units are suspended from horizontal rails beneath the worktop. The under-bench units have been designed to provide clear access to the floor for cleaning.
Pedestal System (Floor mounted structure)
The worktops are supported directly on the cupboard units. It is of robust construction and does not require any supporting steelwork to carry the heaviest of bench loads. It is particularly suitable for laboratories which need an economical layout and where flexibility is not required. Access to the service void is via the removable back panels of the cupboard units and knee spaces. Floor covering can be coved to skirting to form a clean and sealed area.
A fume hood (sometimes called a fume cupboard or fume closet) is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapors or dusts. Two main types exist, ducted and recirculating (ductless). The principle is the same for both types: air is drawn in from the front (open) side of the cabinet, and either expelled outside the building or made safe through filtration and fed back into the room.
All wooden (MFC) Office furniture
Cabinet made of 25mm thickness of MFC (melamine faced chipboard) with melamine laminates two-sided, edging strips.
PP structure lab table lab bench
Adopt 12mm thickness two-sided porcelain white PP board, PP electrode full welding connection; Door plank: adopt 12mm thickness two-sided porcelain white PP board, strong acid-base Lining plate adopts the special PP material 12mm thickness laboratory plate, corrosion resistance
All wooden structure lab table lab bench
All wooden experimental bench chooses laboratory special corrosion mesa of acid and alkali resistant easy to clean. The cabinets is made of high density board, the section adopts PVC sealing waterproofing treatment with firm structure, beautiful and practical.
Modular lab limited production of the wooden bench can in the largest extent meet your less capital investment, constructing the most economic, practical science laboratory.
Aluminum and wooden structure lab table lab bench (Stable structure, Nice generous, Durable)
Framework uses special aluminum alloy uprights support and frame beam, the surface by epoxy resin high village in electrostatic powder spraying.
Full steel structure lab table lab bench (Durable, nice, with anti-corrosion, rust, moisture and other functions)
Steel using high-quality cold-rolled steel plate, through a die forming, the plate cutting, slotted, bending process, all welding cases of grinding and polishing processing, smooth not hurting hands. Surface after picking, phosphating and epoxy resin powder coating, with anti-corrosion, antirust and moisture-proof function.
Steel and wood structure lab table lab bench
Steel and wood structure is the modern laboratory preferred structure type. Structure of steel and wood with high strength bearing quality, good flexibility, excellent corrosion resistance, the use of humanization of real rooms, more convenient maintenance etc.
|Accessories||Pegboard, sink, faucet, gas fitting, sockets, eyewash, exhaust hood, lab stools etc|
|Haning cabinet||18mm thick MDF or Cold-rolled steel sheets / fixed on the wall or Steel frame|
|Pegboard||PP boards and PP peg with tray hole for water drainage (Drying rack)|
|Shelves||Steel column with glass shelves (with protection rails)|
|Slideway||Self-closing three section slide rail, no noise.|
|PP sink + Faucet||High grade PP sink with three way cold water facucet (304 SUS body with ceramic valve core)|
|Handle||Steel embedded handle or C type stainless steel handle|
|Hinge||304 SUS high quality hinge or DTC 105 degree hinge|
|Sockets||Aluminum alloy box with electric sokcet|
|Gas fitting||solid brass with high gloss epoxy coating|
|Eyewash||Solid brass with high gloss epoxy power, PP dust cap|
|Lab stool||Fixed foot or moving wheels (Chrome plated body with Polyurethane seat)|
|Exhaust hood||PP universal exhaust hood|