H frame Suspended System Dental Laboratory Bench / Dental Lab Working Table

13mm thick gray Phenolic Resin steel and wood structure dental laboratory bench

laboratory benches are of major significance. The consequent separation of services supply and furniture creates flexibility in the laboratory. All variants of our benches can be selected with various worktop materials for a large number of application possibilities everywhere in the laboratory. High stability, straightforward design and perfect appearance characterise our laboratory benches.

Suspended System

The worktop is supported by cantilever steel frame system. Cupboard and drawer units are suspended from horizontal rails beneath the worktop. The under-bench units have been designed to provide clear access to the floor for cleaning.

Clear access for floor cleaning / Worktop supported by steel frame / Under-bench units can be repositioned

The H-frame

provides a high level of stability for add-on tables, mobile tables and analysis tables for working sitting or standing.

Intended use

Bench frame with worktop made of various materials as a work surface and storage area for laboratory work

Supporting construction for analytical equipment and superstructures

Not suitable for laboratory work where hazardous substances must be extracted

Worktop widths are from 600mm to 750mm for wall benches and from 750mm to 1500mm for island benches, however any widths required can be catered for. Worktops are standard 850mm high in laboratories, and 750mm high for write up benches, however other heights are also available.

All the above can be mixed to suit the needs of each individual laboratory.

We’re here to answer any questions you may have. It’s our goal to make your experience with MODULAR LAB, a pleasant and rewarding one that will also make your laboratory the best it can be. You can call us at 0086-15917438799 and speak one on one with a helpful and friendly member of MODULAR LAB’s planning and design team or send us an inquiry and start creating your new laboratory.

Steel and wood structure lab bench

Work Surfaces

EPOXY RESIN

Because of the natural resistance to corrosion, the industry has found it superior to any other top material for laboratory work. It is resistant to most organic and inorganic chemicals and is non-toxic. In addition, it is resistant to mechanical and thermal shock.

STAINLESS STEEL

Work surfaces are designed for extra heavy chemical and physical use. Outstanding heat and chemical resistance is its main characteristic.

PHENOLIC RESIN

Surfaces made of cost effective High Pressure Phenolic Resin composite are resistant to chemical stain and corrosion. Non-porous and non-conductive, it’s strong durable qualities enable it to withstand high impact and shock. It is easily cleaned with soap and warm water.

PLASTIC LAMINATE

Thick decorative and durable laminates are available in an array of colors, shapes and sizes to support your laboratory needs when the resistant qualities of resin or steel surfaces are not needed.